HomeCareerContactCheck Email

Cable Tapes


These Tubes are widely used for Power and Industrial boilers, Transformers, Super heaters, Automobiles and Bicycles, Railway Electrification, Furniture and General Engineering industrial uses etc.

Product Variations & Specifications of Galvanized Steel Strips And Tapes

Finish: The surface of Galvanized steel strips is free form scales, seams, Zinc flakes and other surface imperfection. The zinc coating shall be smooth and continuous.

  • Thickness: 0.20 mm to 0.90 mm
  • Width : 20 mm to 90 mm

General Technical Specifications

  • Tensile Strength : 28 to 50 kgf/mm2
  • Elongation : Minimum 10% on 254 mm gauge length.
  • Zinc Coating : Minimum 110 gm/sqm to 140 gm/sqm (total weight on all four sides).
    However, this can be increased to suit customer's requirements.
  • Weighment tolerance : A tolerance of +/- 5% can be accepted by buyer and manufacturer.

Packing Options

Galvanized steel coils are wrapped in strong water proof sea-worthy packing and are in palletized loads. Other types of packing can be done as required.

Normal Delivery Schedules

  • Delivery Form : Galvanized Steel Strips are supplied in continuous lengths.
  • Coil Size : Inside Diameter- minimum 150 mm-300MM, Outside Diameter - Within 600-750MM.

Product Testing

Galvanized Steel Strips are manufactured according to customer's requirements and specifications. Our products conform to the following standards:

  • ASTM A90 BS 2989
  • ASTM A93 IS 3975
  • ASTM A459